188 lines
5.0 KiB
C
188 lines
5.0 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file adc.c
|
|
* @brief This file provides code for the configuration
|
|
* of the ADC instances.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2024 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "adc.h"
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
ADC_HandleTypeDef hadc1;
|
|
|
|
/* ADC1 init function */
|
|
void MX_ADC1_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN ADC1_Init 0 */
|
|
|
|
/* USER CODE END ADC1_Init 0 */
|
|
|
|
ADC_MultiModeTypeDef multimode = {0};
|
|
ADC_ChannelConfTypeDef sConfig = {0};
|
|
|
|
/* USER CODE BEGIN ADC1_Init 1 */
|
|
|
|
/* USER CODE END ADC1_Init 1 */
|
|
|
|
/** Common config
|
|
*/
|
|
hadc1.Instance = ADC1;
|
|
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
|
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
|
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
|
hadc1.Init.GainCompensation = 0;
|
|
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
|
|
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
|
hadc1.Init.LowPowerAutoWait = DISABLE;
|
|
hadc1.Init.ContinuousConvMode = DISABLE;
|
|
hadc1.Init.NbrOfConversion = 1;
|
|
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
|
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
|
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
|
hadc1.Init.DMAContinuousRequests = DISABLE;
|
|
hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
|
|
hadc1.Init.OversamplingMode = DISABLE;
|
|
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/** Configure the ADC multi-mode
|
|
*/
|
|
multimode.Mode = ADC_MODE_INDEPENDENT;
|
|
if (HAL_ADCEx_MultiModeConfigChannel(&hadc1, &multimode) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/** Configure Regular Channel
|
|
*/
|
|
sConfig.Channel = ADC_CHANNEL_1;
|
|
sConfig.Rank = ADC_REGULAR_RANK_1;
|
|
sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
|
|
sConfig.SingleDiff = ADC_SINGLE_ENDED;
|
|
sConfig.OffsetNumber = ADC_OFFSET_NONE;
|
|
sConfig.Offset = 0;
|
|
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN ADC1_Init 2 */
|
|
|
|
/* USER CODE END ADC1_Init 2 */
|
|
|
|
}
|
|
|
|
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
|
if(adcHandle->Instance==ADC1)
|
|
{
|
|
/* USER CODE BEGIN ADC1_MspInit 0 */
|
|
|
|
/* USER CODE END ADC1_MspInit 0 */
|
|
|
|
/** Initializes the peripherals clocks
|
|
*/
|
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC12;
|
|
PeriphClkInit.Adc12ClockSelection = RCC_ADC12CLKSOURCE_SYSCLK;
|
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* ADC1 clock enable */
|
|
__HAL_RCC_ADC12_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**ADC1 GPIO Configuration
|
|
PC0 ------> ADC1_IN6
|
|
PC1 ------> ADC1_IN7
|
|
PC2 ------> ADC1_IN8
|
|
PC3 ------> ADC1_IN9
|
|
PA0 ------> ADC1_IN1
|
|
PA1 ------> ADC1_IN2
|
|
PA2 ------> ADC1_IN3
|
|
PA3 ------> ADC1_IN4
|
|
PB14 ------> ADC1_IN5
|
|
*/
|
|
GPIO_InitStruct.Pin = FM1_Pin|FM2_Pin|FM3_Pin|FM4_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = PS1_Pin|PS2_Pin|PS3_Pin|PS4_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = PMP_FB_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(PMP_FB_GPIO_Port, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN ADC1_MspInit 1 */
|
|
|
|
/* USER CODE END ADC1_MspInit 1 */
|
|
}
|
|
}
|
|
|
|
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
|
|
{
|
|
|
|
if(adcHandle->Instance==ADC1)
|
|
{
|
|
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
|
|
|
/* USER CODE END ADC1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_ADC12_CLK_DISABLE();
|
|
|
|
/**ADC1 GPIO Configuration
|
|
PC0 ------> ADC1_IN6
|
|
PC1 ------> ADC1_IN7
|
|
PC2 ------> ADC1_IN8
|
|
PC3 ------> ADC1_IN9
|
|
PA0 ------> ADC1_IN1
|
|
PA1 ------> ADC1_IN2
|
|
PA2 ------> ADC1_IN3
|
|
PA3 ------> ADC1_IN4
|
|
PB14 ------> ADC1_IN5
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, FM1_Pin|FM2_Pin|FM3_Pin|FM4_Pin);
|
|
|
|
HAL_GPIO_DeInit(GPIOA, PS1_Pin|PS2_Pin|PS3_Pin|PS4_Pin);
|
|
|
|
HAL_GPIO_DeInit(PMP_FB_GPIO_Port, PMP_FB_Pin);
|
|
|
|
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
|
|
|
/* USER CODE END ADC1_MspDeInit 1 */
|
|
}
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|